notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 50 ? high isolation 50 to 1000 mhz amplifer coaxial zfl-2had+ zfl-2had maximum ratings features operating temperature -20c to 71c storage temperature -55c to 100c dc voltage +17v max. amplifer electrical specifcations rev. d m151107 zfl-2had edr-10422/2 151005 ? wideband, 50 to 1000 mhz ? active directivity (isolation-gain), 30 db typ. at 50-500 mhz model no. frequency (mhz) gain (db) maximum power (dbm) dynamic range vswr (:1) typ. active directivity 1 (db) dc power f l f u min. flatness max. output (1 db compr.) input (no damage) nf (db) typ. ip3 (dbm) typ. in out volt (v) nom. current (ma) max. m total range l u l u typ. min. typ. min. zfl-2had(+) 50 1000 11 0.7 1.0 +20 +20 +15 6 +35 1.5 1.5 30 20 21 15 15 115 ZFL-2HADX(+)* 50 1000 11 0.7 1.0 +20 +20 +15 6 +35 1.5 1.5 30 20 21 15 15 115 applications ? vhf/uhf ? cellular ? receivers ? two-tone, 3rd order im testing * heat sink not included 1 active directivity(db)= isolation (db)- gain (db) open load is not recommended, potentially can cause damage. with no load derate max input power by 20 db l= low range (f l to f u /2) m= mid range (2f l to f u /2) u= upper range (f u /2 to f u ) connectors model sma zfl-2had(+) bracket (option b) sma ZFL-2HADX(+) to order without heat sink, add suffx x to model number. alternative heat sinking and heat removal must be provided by the user to limit maximum temperature to 71c, in order to ensure proper performance. for reference, this requires thermal resistance of users external heat sink to be 15c/w max. outline dimensions ( ) inch mm outline drawing zfl-2had(+) ZFL-2HADX(+) a b c d e f g h j k l m n p wt* 1.25 1.56 .75 .63 .39 1.50 1.000 -- .125 .46 2.19 1.688 .06 .750 grams 31.75 39.62 19.05 16.00 9.91 38.10 25.40 -- 3.18 11.68 55.63 42.88 1.52 19.05 85.0 *70 grams without heat sink case style: ss98 permanent damage may occur if any of these limits are exceeded. +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 zfl-2had+ zfl-2had typical performance data/curves zfl-2had vswr 1.0 1.2 1.4 1.6 1.8 2.0 50 240 430 620 810 1000 frequency (mhz) vswr in out zfl-2had directivity 10 20 30 40 50 60 50 240 430 620 810 1000 frequency (mhz) directivity (db) 12v 15v 16v zfl-2had gain 11.0 11.6 12.2 12.8 13.4 14.0 50 240 430 620 810 1000 frequency (mhz) gain (db) 12v 15v 16v zfl-2had output power at 1-db compression 20 21 22 23 24 25 50 240 430 620 810 1000 frequency (mhz) output power (dbm) zfl-2had noise figure 0 2 4 6 8 10 50 240 430 620 810 1000 frequency (mhz) noise figure (db) a t 15v 50.00 11.90 12.16 12.15 47.00 46.20 47.30 1.01 1.28 6.78 21.73 100.00 11.88 12.14 12.13 39.00 41.00 41.00 1.02 1.28 5.91 21.67 150.00 11.90 12.15 12.14 35.70 36.80 37.60 1.02 1.28 5.57 21.66 200.00 11.89 12.15 12.14 33.30 34.50 34.50 1.03 1.29 5.30 21.57 250.00 11.95 12.19 12.18 31.10 32.00 32.40 1.04 1.29 5.16 21.53 300.00 12.03 12.28 12.27 29.40 30.50 30.60 1.06 1.30 5.03 21.51 350.00 12.05 12.29 12.28 27.80 29.10 29.20 1.08 1.30 4.91 21.43 400.00 12.12 12.36 12.35 26.30 27.60 28.10 1.10 1.31 4.80 21.36 450.00 12.19 12.43 12.42 25.10 26.20 26.70 1.12 1.32 4.66 21.31 500.00 12.26 12.49 12.48 24.00 25.20 25.70 1.15 1.32 4.56 21.32 550.00 12.34 12.57 12.55 22.90 24.20 24.60 1.18 1.33 4.44 21.28 600.00 12.40 12.62 12.60 22.00 23.30 23.70 1.21 1.34 4.34 21.24 650.00 12.49 12.70 12.68 21.10 22.30 22.80 1.25 1.35 4.22 21.19 700.00 12.56 12.77 12.76 20.10 21.50 21.80 1.29 1.37 4.13 21.14 750.00 12.66 12.85 12.83 19.20 20.50 21.00 1.33 1.38 4.05 21.14 800.00 12.60 12.80 12.79 18.60 20.10 20.60 1.37 1.39 3.97 21.12 850.00 12.79 12.99 12.98 17.60 19.00 19.60 1.42 1.40 3.90 21.05 900.00 12.62 12.81 12.79 17.30 18.70 19.30 1.47 1.42 3.82 21.11 950.00 12.72 12.91 12.89 16.50 17.90 18.60 1.52 1.43 3.75 21.05 1000.00 12.71 12.88 12.86 15.90 17.30 17.90 1.58 1.45 3.64 21.06 frequency (mhz) gain (db) directivity (db) vswr (:1) noise figure (db) pout at 1 db compr. (dbm) 12v 15v 16v 12v 15v 16v in out 15v 15v
|
